VINYL SK is the alternative to full-surface bonding of adhesive design planks from 2 mm thickness. It is laid floating on the subfloor and can be used on many hard floors in addition to screed. The self-adhesive functional layer on the top side guarantees simple and quick installation thanks to its adhesive delay and the protective film divided in the middle. Due to its low material thickness of 1 mm, it is also excellently suited for the renovation sector and can be removed at any time without leaving any residue. In combination with adhesive planks, it is also a price alternative to click design floors.
The high pressure stability protects the locking system.
Noise perceived in underlying or adjacent rooms.
The integrated moisture protection prevents damage caused by rising residual moisture.
* The entire floor system is tested and assessed here. Measured under laminate flooring. Values for impact sound reduction and walking sound improvement are tested according to standardised structures. In practice, these values may deviate due to individual construction methods and building products and their arrangement.
All VISCOH products are approved by the building authorities.
Technical data for VISCOH VINYL SK as PDF file
Download PDFInstallation instructions for VISCOH VINYL SK as PDF file
Download PDFBuilding authority approval (DIBT) for VISCOH VINYL SK
Download PDFFor better illustration, we have provided a small video clip around the installation of our VISCOH VINYL SK underlay.
Before installation, follow the installation and application instructions (on each roll) and the top flooring manufacturer’s instructions.
Completely unroll the first web (cover film on top) along one wall.
First, peel off a piece of the protective film flat on the wall side.
Place the first plank of the floor along the protective film at the center of the web.
Place the second plank parallel to the first plank with an offset of approx. 40 cm.
Continue laying the first two rows of planks reciprocally.
Lay the next sheet of the underlay. (floor must overlap at least 5cm).